Skip to main content
Version: 0.14.13

Getting started with Great Expectations

Welcome to the Great Expectations getting started tutorial! This tutorial will help you set up your first local deployment of Great Expectations. This deployment will contain a small Expectation SuiteA collection of verifiable assertions about data. that we will use to ValidateThe act of applying an Expectation Suite to a Batch. some sample data. We'll also introduce important concepts, with links to detailed material you can dig into later.

tip

The steps described in this tutorial assume you are installing Great Expectations version 0.13.8 or above.

For a tutorial for older versions of Great Expectations, please see older versions of this documentation, which can be found here.

This tutorial will walk you through the following steps

Setup

Setup

First, we will make sure you have Great Expectations installed and show you how to initialize a Data ContextThe primary entry point for a Great Expectations deployment, with configurations and methods for all supporting components..

Connect to Data

Connect to Data

Then you will learn how to configure a DatasourceProvides a standard API for accessing and interacting with data from a wide variety of source systems. to connect to your data.

Create Expectations

Create Expectations

You will then create your first Expectation Suite using the built-in automated ProfilerGenerates Metrics and candidate Expectations from data.. You'll also take your first look at Data DocsHuman readable documentation generated from Great Expectations metadata detailing Expectations, Validation Results, etc., where you will be able to see the ExpectationsA verifiable assertion about data. that were created.

Validate Data

Validate Data

Finally, we will show you how to use this Expectation Suite to Validate a new batch of data, and take a deeper look at the Data Docs which will show your Validation ResultsGenerated when data is Validated against an Expectation or Expectation Suite..

But before we dive into the first step, let's bring you up to speed on the problem we are going to address in this tutorial, and the data that we'll be using to illustrate it.

The data problem we're solving in this tutorial

In this tutorial we will be looking at two sets of data representing the same information over different periods of time. We will use the values of the first set of data to populate the rules that we expect this data to follow in the future. We will then use these Expectations to determine if there is a problem with the second set of data.

The data we're going to use for this tutorial is the NYC taxi data. This is an open data set which is updated every month. Each record in the data corresponds to one taxi ride and contains information such as the pick-up and drop-off location, the payment amount, and the number of passengers, among others.

In this tutorial, we provide two CSV files, each with a 10,000 row sample of the Yellow Taxi Trip Records set:

  • yellow_tripdata_sample_2019-01.csv: a sample of the January 2019 taxi data

  • yellow_tripdata_sample_2019-02.csv: a sample of the February 2019 taxi data

For purposes of this tutorial, we are treating the January 2019 taxi data as our "current" data, and the February 2019 taxi data as "future" data that we have not yet looked at. We will use Great Expectations to build a profile of the January data and then use that profile to check for any unexpected data quality issues in the February data. In a real-life scenario, this would ensure that any problems with the February data would be caught (so it could be dealt with) before the February data is used in a production application!

It should be noted that in the tutorial we only have one month's worth of "current" data. However, you can use Multi-Batch Profilers to build profiles of multiple past or current sets of data. Doing so will generally result in a more accurate data profile but for this small example a single set of "current" data will suffice.

Getting started with the Getting Started Tutorial

Now that you have the background for the data we're using and what we want to do with it, we're ready to start the tutorial in earnest.

Remember the icons for the four steps we'll be going through?

SetupArrowConnect to DataArrowCreate ExpectationsArrowValidate Data

Great! You should know: The icon associated with each of these steps will also be displayed on any related documentation. So if you do follow links into more detailed discussions of anything we introduce you to, you will be able to find your way back to the step you were on with ease.

And now it looks like you're ready to move on to Step 1: Setup.